Ultralite MK5 comes with CUEMIX5 which is a poorly designed software.
It does not give me any options for have the device or the software application DISPLAY the current configuration setting.
At least I have not found any options to do that. Does any one know if I am missing something?
I used the old Cuemix software with the 5 MOTU 896 MK3 Hybrides I have. I was able to have the device display which setting was active.
I use the Ultralite for public speaking and therefore my Public speaking configuration contains no reverb but a different compression 4:1 and I use an entirely different configuration setting for my music performance which has reverb turned on and 2:1 compression .
I am able to save both settings but if I retrieve either one, I have no way of knowing which setting is active because the neither the device nor the software is able to display which setting is active.
Any one know if there is any fix for this?
Noah
Ultralite MK5
Moderator: James Steele
Forum rules
The forum for petitions, theoretical discussion, gripes, or other matters outside deemed outside the scope of helping users make optimal use of MOTU hardware and software. Posts in other forums may be moved here at the moderators discretion. No politics or religion!!
The forum for petitions, theoretical discussion, gripes, or other matters outside deemed outside the scope of helping users make optimal use of MOTU hardware and software. Posts in other forums may be moved here at the moderators discretion. No politics or religion!!
-
mikehalloran
- Posts: 16273
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: Ultralite MK5
Sounds like you'll need to speak with MOTU Support on this. CueMix is baked into te hardware while the interface is found in the driver.
Are you up-to-date? There was new firmware and drivers for Mac and Windows released this month.
Are you up-to-date? There was new firmware and drivers for Mac and Windows released this month.
- Screenshot 2024-10-26 at 10.49.09 PM.png (183.52 KiB) Viewed 3925 times
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
Re: Ultralite MK5
Hi Noah.
To my knowledge, there is no way to display what preset you use.
I have the same issue as you, and it's a good idea for a feature request, but you can manage it by just loading the preset you need each time you start the Ultralite (without even checking what settings are active).
It's not ideal, but it's the way I do it...
But yes, it would be much better to have a little text displayed somewhere that could tell us : "Live", "Mixing" or "Recording vocals"...
To my knowledge, there is no way to display what preset you use.
I have the same issue as you, and it's a good idea for a feature request, but you can manage it by just loading the preset you need each time you start the Ultralite (without even checking what settings are active).
It's not ideal, but it's the way I do it...
But yes, it would be much better to have a little text displayed somewhere that could tell us : "Live", "Mixing" or "Recording vocals"...
