How do I fix "unconfigured ports" for input on MIDI tracks?

For seeking technical help with Digital Performer and/or plug-ins on MacOS.

Moderator: James Steele

Forum rules
This forum is for seeking solutions to technical problems involving Digital Performer and/or plug-ins on MacOS, as well as feature requests, criticisms, comparison to other DAWs.
Post Reply
TopoTony
Posts: 3
Joined: Mon May 06, 2024 10:25 am
Primary DAW OS: MacOS

How do I fix "unconfigured ports" for input on MIDI tracks?

Post by TopoTony »

I've just switched over to direct USB input from my Nord Piano, and under a MIDI track's input drop down, it shows Unconfigured ports > Nord Piano. It seems to work fine, but I was wondering how to configure it, or if that's even necessary. I've gone into the Audio/MIDI settings on the Mac and it shows the Nord Piano in the MIDI configuration, but I don't see anything else in there to specifically assign it to a DAW. Thanks for any advise.
User avatar
stubbsonic
Posts: 4705
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: How do I fix "unconfigured ports" for input on MIDI tracks?

Post by stubbsonic »

In Audio MIDI Setup, if you double click it, does it bring up some configuration options?
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
User avatar
James Steele
Site Administrator
Posts: 21392
Joined: Fri Oct 15, 2004 10:01 pm
Primary DAW OS: MacOS
Location: San Diego, CA - U.S.A.
Contact:

Re: How do I fix "unconfigured ports" for input on MIDI tracks?

Post by James Steele »

TopoTony wrote: Mon May 06, 2024 12:20 pm I've just switched over to direct USB input from my Nord Piano, and under a MIDI track's input drop down, it shows Unconfigured ports > Nord Piano. It seems to work fine, but I was wondering how to configure it, or if that's even necessary. I've gone into the Audio/MIDI settings on the Mac and it shows the Nord Piano in the MIDI configuration, but I don't see anything else in there to specifically assign it to a DAW. Thanks for any advise.
This graphic below is from a very old post I made on the board about configuring an M-Audio Axiom controller, but it may be if all you're after is SEEING the Nord Piano as an input, you could try configuring a new MIDI instrument in AMS and naming it as needed and then connecting it "to itself" by connecting the one you created to the one that appears automatically when connected via USB.

Don't ask my why this works... but it has for years in situations like this.

hookup.png
hookup.png (114.71 KiB) Viewed 152 times
JamesSteeleProject.com | Facebook | Instagram | Twitter

Mac Studio M1 Max, 64GB/2TB, MacOS 14.5 RC1, DP 11.31, MOTU 828es, MOTU 24Ai, MOTU MIDI Express XT, UAD-2 TB3 Satellite OCTO, Console 1 Mk2, Avid S3, NI Komplete Kontrol S88 Mk2, Red Type B, Millennia HV-3C, Warm Audio WA-2A, AudioScape 76F, Dean guitars, Marshall amps, etc., etc.!
TopoTony
Posts: 3
Joined: Mon May 06, 2024 10:25 am
Primary DAW OS: MacOS

Re: How do I fix "unconfigured ports" for input on MIDI tracks?

Post by TopoTony »

So, basically create another Nord and connect the two together? I’ll give it a try. Thanks
User avatar
James Steele
Site Administrator
Posts: 21392
Joined: Fri Oct 15, 2004 10:01 pm
Primary DAW OS: MacOS
Location: San Diego, CA - U.S.A.
Contact:

Re: How do I fix "unconfigured ports" for input on MIDI tracks?

Post by James Steele »

TopoTony wrote: Mon May 06, 2024 1:51 pm So, basically create another Nord and connect the two together? I’ll give it a try. Thanks
Basically it. It's weird, but it often works.
JamesSteeleProject.com | Facebook | Instagram | Twitter

Mac Studio M1 Max, 64GB/2TB, MacOS 14.5 RC1, DP 11.31, MOTU 828es, MOTU 24Ai, MOTU MIDI Express XT, UAD-2 TB3 Satellite OCTO, Console 1 Mk2, Avid S3, NI Komplete Kontrol S88 Mk2, Red Type B, Millennia HV-3C, Warm Audio WA-2A, AudioScape 76F, Dean guitars, Marshall amps, etc., etc.!
User avatar
HCMarkus
Posts: 9799
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Re: How do I fix "unconfigured ports" for input on MIDI tracks?

Post by HCMarkus »

You run into that when the MIDI Device is both a Hub and Controller. I used to see that on my Yamaha Motif, and on my S90ES. The weirdest one to set up was my Roland A800/A500:
Screenshot 2024-05-06 at 8.29.44 PM.png
Screenshot 2024-05-06 at 8.29.44 PM.png (868.76 KiB) Viewed 88 times
Post Reply