M4 and Loopback
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
M4 and Loopback
I just received my M4 today and I'm having trouble with the optional driver. The loopback inputs are not appearing when I launch DP. The driver is definitely installed (Mac HD > Library > Extensions > MOTUCoreUAC.kext). I have tried resetting PRAM...no luck. The interface is otherwise working properly. What am I missing?
Mac Studio M2 Ultra (192GB RAM) | macOS 13.5.2 | MOTU M4 | DP 11.3
-
stubbsonic
- Posts: 5191
- Joined: Fri Dec 22, 2006 12:56 pm
- Primary DAW OS: MacOS
- Contact:
Re: M4 and Loopback
What OS are you running? I'm pretty sure it needs High Sierra (10.13) or higher.
Have you tinkered with Audio MIDI Setup? Is there some other config panel app that gets installed with the driver?
Have you tinkered with Audio MIDI Setup? Is there some other config panel app that gets installed with the driver?
M1 MBP; OS 15.3, FF800, DP 11.33, PC3K7, K2661, iPad6, Godin XTSA (w/ SY-1000), 2 Ibanez 5-string basses (1 fretted, 1 fretless), FX galore
http://www.jonstubbsmusic.com
http://www.jonstubbsmusic.com
Re: M4 and Loopback
I'm on 10.15.7 (the latest Catalina I believe). I have explored Audio MIDI setup with no success. I am not aware of any companion app or configuration panel. It seems like MOTU wanted to go the minimalist route.
Mac Studio M2 Ultra (192GB RAM) | macOS 13.5.2 | MOTU M4 | DP 11.3
-
mikehalloran
- Posts: 16275
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: M4 and Loopback
Have you added the driver in the Security Settings?
If not, reinstall and add them per the instructions below. You have less than a 30 minutes after installation to do this.
https://motu.com/techsupport/technotes/ ... igh-sierra
If not, reinstall and add them per the instructions below. You have less than a 30 minutes after installation to do this.
https://motu.com/techsupport/technotes/ ... igh-sierra
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
Re: M4 and Loopback
Aha...that was it. Many thanks! 
Mac Studio M2 Ultra (192GB RAM) | macOS 13.5.2 | MOTU M4 | DP 11.3